How to turn off Car Alarm

Almost every car is now equipped with an anti-theft system. But sometimes the equipment fails and the alarm does not turn off. We tell you How to turn off Car Alarm and not wake up the whole yard.

The alarm may not work correctly in different cases:

Discharging a car battery. In this case, you need to reset the negative terminal of the battery from the power supply, open the door with the key. It will be possible to start the engine with the help of “lighting up” from another car.

Dead battery in the key fob. You need to replace it with a new one.

Lots of radio interference. In large cities, there are a lot of radio towers that transmit signals to each other. There are also places where the connection catches badly : underground parking lots, places with massive concrete partitions.

It is necessary to get as close as possible to the central control unit of the machine and press the corresponding key fob button again.

How to turn off the alarm on a car without a key fob

If the driver does not have a key fob from the alarm, then the car can be opened in two quick ways to turn off: emergency and coded. Regardless of the method chosen, you need to know where the Valet button is located. With its help, you can put the car into service mode.

How to turn off the alarm using the “Jack” button

This button is most often located next to the fuse box in the car. It can also be found under the dashboard, near the driver’s pedals, under the steering column, or behind the glove box. To find out where the “Jack” button is located, the motorist should focus on the anti-theft system indicator light: the button is found somewhere nearby.

The driver then proceeds to carry out a coded deactivation using a special PIN code, which consists of two to four digits (not including the number 0) and is known only to him.

Procedure:

• turn on the ignition;
• press the “Jack” button – the number of presses corresponds to the first digit of the PIN code;
• turn off the ignition;
• repeat all the previous steps as many times as there are digits in the PIN code – while the number of clicks on the secret button each time will correspond to the next digit of the code.

A more detailed procedure is described in the instructions for using the alarm, which every car owner needs to read.

How to turn off the car alarm

In this case, the emergency shutdown of the alarm is used. “To do this, the motorist should know the sequence of actions performed. Most often, this is a combination of turning the ignition on and off and several presses of the Jack button.

While the driver is remembering the PIN code or looking for a new battery for the key fob, you can get rid of the shrill beep. To do this, reset the negative terminal from the battery.

How to remove the hood lock

When discharging the battery, motorists are faced with a problem – the hood is locked, or rather, its electromechanical lock.

Action options:

• pull the emergency cable, which is installed during the installation of the security system and is specially brought out to hard-to-reach places;
• “power” the battery using the backup power in the control unit. At the other end of this power supply are battery clips “crocodile”, which must be connected to the “donor” battery. Then, using the key fob, you can open the hood.

How to turn off the Starline alarm

What should be done:

• open the car door;
• turn on the ignition;
• press the “Jack” button and hold it for 6 seconds;
• if the instruction is carried out correctly, the driver will hear a sound signal indicating that the anti-theft system is operating in service mode, the light signal will start flashing slowly;
• turn off the ignition.

How to turn off the Panther alarm (Pantera)

Instructions for action:

• open car;
• turn on the ignition for a couple of seconds and turn it off;
• turn on the ignition again;
• press the “Jack” button and hold it pressed for 10-15 seconds.
• After these manipulations, the security system will go into service mode.

How to turn off the Alligator alarm

If it is not possible to unlock the car with a key fob, then you need to use the methods of emergency and coded shutdown. The coding mode starts from the activation of function No. 9 (you can find this function on the user manual). After that, the driver needs:

• open the car;
• turn on the ignition;
• in the first 15 seconds, have time to press the “Jack” button once;
• turn off the ignition.

However, after that, the anti-theft system will not go into service mode. If the car has a passive arming function, it will be blocked again after 30 seconds.

How to turn off the Sheriff alarm

The algorithm includes the following steps:

• open the car with the key;
• turn on ignition;
• press secret button “Jack” once;
• turn off and turn on the ignition;
• press the “Jack” button once again.

As a result, the security system will go into service mode.

How to turn off the alarm Jaguar

In emergency shutdown mode, you need:

• open the car door;
• turn on the ignition;
• press the “Jack” button four times within 15 seconds;
• turn off the ignition.
• After performing these actions, the protection mode will be removed.

Experts in the installation of security systems advise all motorists to know where the secret Jack button is located, and also carefully read the instructions for the installed alarm.